MAX PUSHING LEVER GRIP 10 MM GROVE, FOR ART.3CM-3D

Serie 3 MAX – “New series with Max hand-grip” The scoring wheel on ball bearings is vibration-damped so as to score thicker tiles or ones with relief surfaces with minimum effort. The change from scoring to breaking position is achieved by a small vertical movement of the hand-grip. Broad tile support table, with the added advantage of measurement conveniently close to the operator. Double registration for regulation of cutting thickness. The swiveling measurement bar supporting the tile rotates through 45° in both directions and is pivoted at the center of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° a second measurement scale gives the length of the diagonal. Measurements are in centimeters or inches on request. The rapid positioning button makes the main angles normally used immediately available. Easy to dismantle to ensure compact dimensions for easy transport. Cuttings system by pushing Extremely strong, allows particularly thick or difficult materials to be easily cut, with the added advantage of measurement conveniently close to the operator. Precision, practical use, and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminum alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile.