Part number: DHPS512M
Product Code : 224126
Availability : In Stock


Availability: In stock

Schluter®-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation.
  • Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into the substrate
  • No thin-set required to install membrane means a faster and easier installation
  • The membrane can easily be repositioned until pressure is exerted
  • Less mess, less cleanup, and fewer tools required
  • The stud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-HK heating cables
  • Nominal 1/4″ (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
  • Self-leveling compounds are not required to encapsulate the cables into the membrane
  • Available by the roll or by the sheet to accommodate various room sizes
  • If the application area requires a membrane that meets or exceeds the requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter®-KERDI membrane, which is certified to meet ANSI A118.10.

Get $10 OFF

Create your account and Get $10 OFF on your first order!

Click here to create you account...

This will close in 20 seconds

Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products
Select your currency
CAD Canadian dollar
Scroll to Top